[SOLVED] Cannot join windows 10 PC to domain – Active Directory & GPO.Where to find the Netsetup.log file

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Attempting to join domain results in an error saying “That domain couldn’t be found. Check the domain name and try again. Disabled IPv6, disabled firewall, added a port to allow the server through, everything. Completely out of ideas. This is a known ongoing issue which Microsoft is working to patch I believe, it pertains to Win 10 build Quickest way to resolve it is offline domain join.

If it’s a single name domain i. Make sure that you only have your internal DNS servers listed, no external DNS servers should be configured on a client computer. I checked in domains and trusts and that is the name that I saw on the lefthand side. This will give you the FDQN you should be using.

DNS responses are cached. So if you got a response from Google saying we don’t know where that resource is that will be cached with a default TTL. I tried the echo command and it gave me the same thing I’ve been using.

I’ve also already tried flushing the DNS, but to no avail. I’ve also been trying to see if it made any difference whether I was hardwired or not, but ethernet made no difference. What is your network type? I can’t find anything definitive but someone once told me a public connection type will not allow you to connect to a domain.

I think I actually had the issue once but reformatted the drive before got the info. If you have the client using DNS of your domain controller and still cannot find the domain, can you confirm the IP and subnet mask are correct and on a live network. I had a similar issues yesterday, turns out I had a duplicate IP address on the network.

Once we fixed that we were able to join the PC to the domain without any issues. Earlier, you mentioned “hardwired or not”, please disconnect any wifi connection you have on the computer in question. In my experience when a machine can’t find the domain it’s almost always a DNS issue.

You have to be able to resolve the fully qualified domain name. A lot of answers above speak about being able to ping the domain. Try pinging the DNS server. Then try an nslookup against that server. Could be a firewall block. Wrong subnet mask. Wrong subnet. Wrong gateway. Bad Ethernet cable. Have you verified that the computer is pulling the right ipaddress, subnet, and dns? This is sounding like the computer is on the wrong VLAN. The problem is always DNS. That being said, Have you tried another port elsewhere on the switch?

You say you added a port to allow through. In my experience there are several ports that have to be allowed through to join a domain. Check out this article:. This usually is not rocket science. Unless something has changed recently, or there are special circumstances, in a Windows domain, with a Windows computer on the same network, to join a domain, you don’t need to anything other than provide the correct domain name and the correct credentials when asked.

The firewall should not need to even be looked at. I suspect something else is going on. I suggest changing the name of the computer to what it will be in the new domain while it is still in “Workgroup”, reboot and then add it to the domain. Make sure you are not trying to add a computer that is already using that name in the new domain.

Not sure if you have any connectivity at all. Are you able to ping anything? Check your hardware as well such as your ethernet cable, NIC, switch, and whatever else you have in play. I had this issue when come to find out there was a legit company publicly registered to use our internal domain name. Duplicate IPs would definitely cause this issue. Duplicate names won’t though. It will join and just remove the trust from another computer with the same name.

I would try the offline domain join method. Then you can narrow it down to what the issue really is on that machine, ie DNS or something else sounds like DNS issue to me. If you want to test DNS using 8. Remove it when done.

Always have an internal DNS server as your primary one. They changed the process with For us we now need to specify “domain. I about had a heart attack the first time I couldn’t join any PC’s to the domain, after the update. I don’t know, you might have to try a few things. For me, my domain is called “domain”. In order to join it I now have to type “domain.

So maybe for you it would be “domain. Just ran in to something like this earlier this week. Go Microsoft. I don’t see where it was mentioned but is this the first computer to connect to the domain from this network or are there other machines working properly?

I was just about to post on here that I was able to figure it out by doing those registry edits because its a single label domain, but someone had already posted that. Thanks guys!

This topic has been locked by an administrator and is no longer open for commenting. To continue this discussion, please ask a new question. Your daily dose of tech news, in brief. He conceived the ma I manage several M tenants all with Security Defaults enabled and in one specific tenant, for some reason, no users including Global Admins are able to create a Team directly in the Teams app using the “Join or create a team” option.

This option IS Do you take breaks or do you keep going until you complete the 6 steps of debugging? Today I overcame a, what I thought was a major problem, minor challenge. We just got don Good afternoon and welcome to today’s briefing. Hope you are starting to enjoy the warmer weather up in the north it has been pretty awesome.

That said Security doesn’t sleep and so do we have to keep our systems and our knowledge up to date. We have some Online Events. Log in Join. Spice 9 Reply Verify your account to enable IT peers to see that you are a professional. Lookup this subkey:. Set the Value to 1. Another workaround is to roll back to previous build, you should be able to join domain but would highly recommend backing up libraries from the PC first CremoAcanthis This person is a verified professional.

Are you able to ping the FQDN? OP mannylaraiv This person is a verified professional. Spice 5 flag Report. Martin This person is a verified professional. On the dns server in AD what’s the domain called that’s what you need to attach to flag Report. Spice 1 flag Report. Changed it to where only the internal DNS is listed, and still no luck flag Report.

Determinist This person is a verified professional. Justin This person is a verified professional.

 
 

 

Joining Domain: I am unable to click to join domain as it is – Microsoft Community.Question Info

 

I about had a heart attack the first time I couldn’t join any PC’s to the domain, after the update. I don’t know, you might have to try a few things. For me, my domain is called “domain”. In order to join it I now have to type “domain. So maybe for you it would be “domain. Just ran in to something like this earlier this week.

Go Microsoft. I don’t see where it was mentioned but is this the first computer to connect to the domain from this network or are there other machines working properly? I was just about to post on here that I was able to figure it out by doing those registry edits because its a single label domain, but someone had already posted that.

Thanks guys! This topic has been locked by an administrator and is no longer open for commenting. To continue this discussion, please ask a new question.

Your daily dose of tech news, in brief. He conceived the ma I manage several M tenants all with Security Defaults enabled and in one specific tenant, for some reason, no users including Global Admins are able to create a Team directly in the Teams app using the “Join or create a team” option. This option IS Do you take breaks or do you keep going until you complete the 6 steps of debugging?

Today I overcame a, what I thought was a major problem, minor challenge. We just got don Good afternoon and welcome to today’s briefing. Hope you are starting to enjoy the warmer weather up in the north it has been pretty awesome. That said Security doesn’t sleep and so do we have to keep our systems and our knowledge up to date. We have some Online Events. Log in Join. Spice 9 Reply Verify your account to enable IT peers to see that you are a professional. Lookup this subkey:.

Set the Value to 1. Another workaround is to roll back to previous build, you should be able to join domain but would highly recommend backing up libraries from the PC first CremoAcanthis This person is a verified professional. Are you able to ping the FQDN?

OP mannylaraiv This person is a verified professional. Spice 5 flag Report. Martin This person is a verified professional. On the dns server in AD what’s the domain called that’s what you need to attach to flag Report. Spice 1 flag Report. Changed it to where only the internal DNS is listed, and still no luck flag Report. Determinist This person is a verified professional.

Justin This person is a verified professional. If you changed it back to internal only you will have to reboot or Text. Spice 2 flag Report. I think I actually had the issue once but reformatted the drive before got the info flag Report. Well, it either isn’t locating the domain or something is blocking it. You will have to verify your resource records. Open a command prompt and input the following Text.

If you have the client using DNS of your domain controller and still cannot find the domain, can you confirm the IP and subnet mask are correct and on a live network Can the machine ping its own gateway?

Will the server process normal A record lookups? Pinging a website on the server gives me a time out. AceOfSpades This person is a verified professional. Is the computer on the same subnet? Any VLANs? ProgramOne This person is a verified professional. Work around for DNS issues.

Regards, Michael Spice 1 flag Report. Regards, Michael He said he already tried this flag Report. Brad-S-Russell This person is a verified professional. Ryan Anderson. John This person is a verified professional.

On a long shot What is the AD forest level? Windows 10 will not join a Windows forest. TLWiz This person is a verified professional. Do you have any network connectivity at all?

My first steps would be: Confirm basic networking. Stan This person is a verified professional. Can you ping the domain name? MSchaller This person is a verified professional. No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.

Before joining the computer to the domain, make sure that you have cleared all mapped connections to any drives. The error may be transient. Try again later. If the issue persists, verify the status of the DC that the client is connecting to active connections, network connectivity, and so on. You may want to restart the DC if the issue persists.

Make sure that you have the most up-to-date drivers installed for the client computer’s network adapter. Verify connectivity between the client that is being joined and the target DC over the required ports and protocols.

Verify that Active Directory is replicating between all DCs. You can use the following command to detect any errors:. The following articles contain port requirement information: Service overview and network port requirements for Windows How to configure a firewall for domains and trusts.

The name will remain “. The specified server cannot perform the operation. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Make sure that you have permissions to add computers to the domain, and that you have not exceeded the quota that is defined by your Domain Administrator.

To join a computer to the domain, the user account must be granted Create computer object permissions in Active Directory.

By default, a non-administrator user can join a maximum of 10 computers to an Active Directory domain. Make sure that you have permissions to add computers to the domain.

To join a computer to the domain, the user account must be granted the Create computer object permission in Active Directory. Additionally, make sure that the specified user account is allowed to log on locally to the client computer. Make sure that you use the correct user name and password combination of an existing Active Directory user account when you are prompted for credentials to add the computer to the domain. This error is likely a transient error that is logged when a domain join searches the target domain to determine whether a matching computer account was already created or whether the join operation has to dynamically create a computer account on the target domain.

This error can occur when the Kerberos token size is larger than the maximum default size. If this situation, you have to increase the Kerberos token size of the computer that you try to join to the domain.

 
 

Windows 10 cannot join domain greyed out free.How to troubleshoot errors that occur when you join Windows-based computers to a domain

 
 

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support. This article describes several common error messages that can occur when you join client computers that are running Windows to a domain. This article also provides troubleshooting suggestions for these errors. For example, if the DNS name of the target domain is contoso. Make sure that the correct DNS server is configured on this client as the preferred DNS, and that the client has connectivity to that server.

To verify this, you can run one of the following commands:. An attempt to resolve the DNS name of a domain controller in the domain being joined has failed. Additionally, restart the computer before you try to join the computer to the domain. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again. Restart the computer that you are trying to join to the domain to make sure that there are no latent connections to any of the domain servers.

Make sure that the correct DNS server has been configured on this client as the preferred DNS, and that the client has connectivity to that server. No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. Before joining the computer to the domain, make sure that you have cleared all mapped connections to any drives.

The error may be transient. Try again later. If the issue persists, verify the status of the DC that the client is connecting to active connections, network connectivity, and so on. You may want to restart the DC if the issue persists. Make sure that you have the most up-to-date drivers installed for the client computer’s network adapter.

Verify connectivity between the client that is being joined and the target DC over the required ports and protocols. Verify that Active Directory is replicating between all DCs. You can use the following command to detect any errors:. The following articles contain port requirement information: Service overview and network port requirements for Windows How to configure a firewall for domains and trusts.

The name will remain “. The specified server cannot perform the operation. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Make sure that you have permissions to add computers to the domain, and that you have not exceeded the quota that is defined by your Domain Administrator.

To join a computer to the domain, the user account must be granted Create computer object permissions in Active Directory. By default, a non-administrator user can join a maximum of 10 computers to an Active Directory domain.

Make sure that you have permissions to add computers to the domain. To join a computer to the domain, the user account must be granted the Create computer object permission in Active Directory.

Additionally, make sure that the specified user account is allowed to log on locally to the client computer.

Make sure that you use the correct user name and password combination of an existing Active Directory user account when you are prompted for credentials to add the computer to the domain. This error is likely a transient error that is logged when a domain join searches the target domain to determine whether a matching computer account was already created or whether the join operation has to dynamically create a computer account on the target domain.

This error can occur when the Kerberos token size is larger than the maximum default size. If this situation, you have to increase the Kerberos token size of the computer that you try to join to the domain.

For more information, see the following Knowledge Base articles: “Not enough storage is available to complete this operation” error message when you use a domain controller to join a computer to a domain Problems with Kerberos authentication when a user belongs to many groups. This problem is related to mismatched SMB Signing settings between the client computer and the DC that is being contacted for the domain join operation.

Review the following documentation to further investigate the current and recommended values in your environment: Error message: The account is not authorized to login from this station Client, service, and program issues can occur if you change security settings and user rights assignments. The account specified for this service is different from the account specified for other services running in the same process. Make sure that the DC through which you are trying to join the domain has the Windows Time service started.

Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Table of contents Exit focus mode. Table of contents. Note The following articles contain port requirement information: Service overview and network port requirements for Windows How to configure a firewall for domains and trusts.

Note By default, a non-administrator user can join a maximum of 10 computers to an Active Directory domain. In this article.